2021 Latest Design Wound Core - Fe-Based 1K101 Amorphous Ribbon – Malio

Inquire Now Next Product

Product Detail

Product Tags

Feedback (2)

abide by the contract", conforms into the market requirement, joins in the market competition by its good quality also as provides a lot more comprehensive and great company for purchasers to let them turn into huge winner. The pursue from the firm, would be the clients' gratification for 1k107 Ribbon, High Precision Electrical Transformer, Cage Terminal For Metering, We guaranteed high quality, if clients were not satisfied with the products' quality, you can return inside 7days with their original states.

2021 Latest Design Wound Core - Fe-Based 1K101 Amorphous Ribbon – Malio Detail:

Description

Product Name	Fe-Based 1K101 Amorphous Ribbon
P/N	MLAR-2131
Width	5-80mm
Thickness	25-35μm
Saturation magnetic induction	1.56 Bs (T)
Coercivity	2.4 Hc (A/m)
Resistivity	1.30 （μΩ·m ）
Magnetostriction coefficient	27 λs (ppm)
Curie temperature	410 Tc (℃)
Crystallization temperature	535 Tx (℃)
Density	7.18 ρ (g/cm3)
Hardness	960 Hv (kg/mm2)
Thermal expansion coefficient	7.6 (ppm/℃)

Application

● Mid-frequency power transformer core, distribution transformer core

● Toroidal uncut cores for smooth filtered output inductors and differential mode input inductors for switching power supplies

● Noise suppression in car stereos, toroidal uncut cores for car navigation system chokes

● Ring-cut cores for PFC power factor correction in air conditioning and plasma TVs

● High frequency rectangular cut cores for output inductors and transformers for switching power supplies, uninterruptible power supplies, etc.

● Toroidal, uncut cores for IGBTs, MOSFETs and GTOs pulse transformers

● High power density variable speed motors, stators and rotors for generators

Features

● Highest saturation magnetic induction among amorphous alloys-reduce components size

● Low coercivity- Improve components efficiency

● Variable Magnetic flux rate – By different core heat treatment processes to meet the requirements of different applications

● Good temperature stability- Can work at -55°C -130°C for long periods of time

● Cores used in transformers are 75% more energy efficient than S9 silicon steel cores in terms of no-load losses and 25% more energy °C efficient in terms of load losses

● Short strip production process and low production cost (see Fig. 1.1)

● The strip has a special microstructure which determines its excellent magnetic properties (Fig. 1.2) and performance stability.

● The composition and process parameters of the strip can be quickly adjusted to meet different usage requirements.

● For new energy solar grid-connected inverters

Figure 1.1 Amorphous ribbon production process

Figure 1.2 Bs versus Hc of different soft magnetic materials

Material comparison

Performance Comparison of Fe-based amorphous alloys with cold-rolled silicon steel
Basic parameters	Fe-based amorphous alloys	Cold-rolled silicon steel(0.2mm)
Saturation magnetic induction Bs (T)	1.56	2.03
Coercivity Hc (A/m)	2.4	25
Core losses(P400HZ/1.0T)(W/kg)	2	7.5
Core losses(P1000HZ/1.0T)(W/kg)	5	25
Core losses(P5000HZ/0.6T)(W/kg)	20	＞150
Core losses(P10000HZ/0.3T)(W/kg)	20	＞100
Maximum magnetic permeability （μ_m）	45X104	4X104
Resistivity (mW-cm)	130	47
Curie temperature(℃)	400	740

440

Product detail pictures:

Related Product Guide:

The key to our success is "Good Products Good quality, Reasonable Value and Efficient Service" for 2021 Latest Design Wound Core - Fe-Based 1K101 Amorphous Ribbon – Malio , The product will supply to all over the world, such as: Senegal, Portugal, Georgia, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and solutions and good service for domestic and international customers.

0.5 Accuracy Hall Effect Current Sensor