China Factory for Transformer Cut Core - Fe-Based 1K101 Amorphous Ribbon – Malio
China Factory for Transformer Cut Core - Fe-Based 1K101 Amorphous Ribbon – Malio Detail:
Description
| Product Name | Fe-Based 1K101 Amorphous Ribbon |
| P/N | MLAR-2131 |
| Width | 5-80mm |
| Thickness | 25-35μm |
| Saturation magnetic induction | 1.56 Bs (T) |
| Coercivity | 2.4 Hc (A/m) |
| Resistivity | 1.30 （μΩ·m ） |
| Magnetostriction coefficient | 27 λs (ppm) |
| Curie temperature | 410 Tc (℃) |
| Crystallization temperature | 535 Tx (℃) |
| Density | 7.18 ρ (g/cm3) |
| Hardness | 960 Hv (kg/mm2) |
| Thermal expansion coefficient | 7.6 (ppm/℃) |
Application
● Mid-frequency power transformer core, distribution transformer core
● Toroidal uncut cores for smooth filtered output inductors and differential mode input inductors for switching power supplies
● Noise suppression in car stereos, toroidal uncut cores for car navigation system chokes
● Ring-cut cores for PFC power factor correction in air conditioning and plasma TVs
● High frequency rectangular cut cores for output inductors and transformers for switching power supplies, uninterruptible power supplies, etc.
● Toroidal, uncut cores for IGBTs, MOSFETs and GTOs pulse transformers
● High power density variable speed motors, stators and rotors for generators
Features
● Highest saturation magnetic induction among amorphous alloys-reduce components size
● Low coercivity- Improve components efficiency
● Variable Magnetic flux rate – By different core heat treatment processes to meet the requirements of different applications
● Good temperature stability- Can work at -55°C -130°C for long periods of time
● Cores used in transformers are 75% more energy efficient than S9 silicon steel cores in terms of no-load losses and 25% more energy °C efficient in terms of load losses
● Short strip production process and low production cost (see Fig. 1.1)
● The strip has a special microstructure which determines its excellent magnetic properties (Fig. 1.2) and performance stability.
● The composition and process parameters of the strip can be quickly adjusted to meet different usage requirements.
● For new energy solar grid-connected inverters
Figure 1.1 Amorphous ribbon production process
Figure 1.2 Bs versus Hc of different soft magnetic materials
Material comparison
| Performance Comparison of Fe-based amorphous alloys with cold-rolled silicon steel | ||
|
Basic parameters |
Fe-based amorphous alloys |
Cold-rolled silicon steel(0.2mm) |
| Saturation magnetic induction Bs (T) |
1.56 |
2.03 |
| Coercivity Hc (A/m) | 2.4 | 25 |
| Core losses(P400HZ/1.0T)(W/kg) | 2 | 7.5 |
| Core losses(P1000HZ/1.0T)(W/kg) | 5 | 25 |
| Core losses(P5000HZ/0.6T)(W/kg) | 20 | ＞150 |
| Core losses(P10000HZ/0.3T)(W/kg) | 20 | ＞100 |
| Maximum magnetic permeability （μm） | 45X104 | 4X104 |
| Resistivity (mW-cm) | 130 | 47 |
| Curie temperature(℃) | 400 | 740 |
Product detail pictures:
Related Product Guide:
With advanced technologies and facilities, strict high quality regulate, reasonable price tag, excellent support and close co-operation with shoppers, we have been devoted to furnishing the best benefit for our buyers for China Factory for Transformer Cut Core - Fe-Based 1K101 Amorphous Ribbon – Malio , The product will supply to all over the world, such as: Norwegian, Durban, Turkmenistan, Our stock have valued 8 million dollar , you can find the competitive parts within short delivery time. Our company is not only your partner in business, but also our company is your assistant in the coming corporation.
By Heather from Durban - 2018.02.08 16:45
In China, we have many partners, this company is the most satisfying to us, reliable quality and good credit, it is worth appreciation.
By Alice from Ireland - 2018.04.25 16:46
