Factory Cheap Fe-Based Nanocrystalline Alloy Strips - Fe-Based 1K101 Amorphous Ribbon – Malio

Inquire Now Next Product

Product Detail

Product Tags

Feedback (2)

We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for Instrument Transformer Core, Clip On Current Transformer, 500 Micro Ohm Shunt, We welcome new and aged buyers from all walks of daily life to get hold of us for upcoming business enterprise interactions and acquiring mutual good results!

Factory Cheap Fe-Based Nanocrystalline Alloy Strips - Fe-Based 1K101 Amorphous Ribbon – Malio Detail:

Description

Product Name	Fe-Based 1K101 Amorphous Ribbon
P/N	MLAR-2131
Width	5-80mm
Thickness	25-35μm
Saturation magnetic induction	1.56 Bs (T)
Coercivity	2.4 Hc (A/m)
Resistivity	1.30 （μΩ·m ）
Magnetostriction coefficient	27 λs (ppm)
Curie temperature	410 Tc (℃)
Crystallization temperature	535 Tx (℃)
Density	7.18 ρ (g/cm3)
Hardness	960 Hv (kg/mm2)
Thermal expansion coefficient	7.6 (ppm/℃)

Application

● Mid-frequency power transformer core, distribution transformer core

● Toroidal uncut cores for smooth filtered output inductors and differential mode input inductors for switching power supplies

● Noise suppression in car stereos, toroidal uncut cores for car navigation system chokes

● Ring-cut cores for PFC power factor correction in air conditioning and plasma TVs

● High frequency rectangular cut cores for output inductors and transformers for switching power supplies, uninterruptible power supplies, etc.

● Toroidal, uncut cores for IGBTs, MOSFETs and GTOs pulse transformers

● High power density variable speed motors, stators and rotors for generators

Features

● Highest saturation magnetic induction among amorphous alloys-reduce components size

● Low coercivity- Improve components efficiency

● Variable Magnetic flux rate – By different core heat treatment processes to meet the requirements of different applications

● Good temperature stability- Can work at -55°C -130°C for long periods of time

● Cores used in transformers are 75% more energy efficient than S9 silicon steel cores in terms of no-load losses and 25% more energy °C efficient in terms of load losses

● Short strip production process and low production cost (see Fig. 1.1)

● The strip has a special microstructure which determines its excellent magnetic properties (Fig. 1.2) and performance stability.

● The composition and process parameters of the strip can be quickly adjusted to meet different usage requirements.

● For new energy solar grid-connected inverters

Figure 1.1 Amorphous ribbon production process

Figure 1.2 Bs versus Hc of different soft magnetic materials

Material comparison

Performance Comparison of Fe-based amorphous alloys with cold-rolled silicon steel
Basic parameters	Fe-based amorphous alloys	Cold-rolled silicon steel(0.2mm)
Saturation magnetic induction Bs (T)	1.56	2.03
Coercivity Hc (A/m)	2.4	25
Core losses(P400HZ/1.0T)(W/kg)	2	7.5
Core losses(P1000HZ/1.0T)(W/kg)	5	25
Core losses(P5000HZ/0.6T)(W/kg)	20	＞150
Core losses(P10000HZ/0.3T)(W/kg)	20	＞100
Maximum magnetic permeability （μ_m）	45X104	4X104
Resistivity (mW-cm)	130	47
Curie temperature(℃)	400	740

440

Product detail pictures:

Related Product Guide:

We'll make each hard work to become excellent and excellent, and speed up our measures for standing from the rank of intercontinental top-grade and high-tech enterprises for Factory Cheap Fe-Based Nanocrystalline Alloy Strips - Fe-Based 1K101 Amorphous Ribbon – Malio , The product will supply to all over the world, such as: Turkmenistan, Bolivia, Paris, We only supply quality products and we believe this is the only way to keep business continue. We can supply custom service too such as Logo, custom size, or custom products etc that can according to customer's requirement.

200a Input Split Core Transformer