• news

Manufacturing Companies for Switching Transformer - Fe-Based 1K101 Amorphous Ribbon – Malio


Product Detail

Product Tags

Related Video

Feedback (2)

As for competitive charges, we believe that you will be searching far and wide for anything that can beat us. We will state with absolute certainty that for such excellent at such charges we have been the lowest around for Reactor Core, Shunt For Meter, Lcm, Should you be fascinated in any of our products and services, remember to do not hesitate to make contact with us. We're ready to reply you inside of 24 several hours soon after receipt of one's ask for and also to develop mutual un-limited advantages and organization in around potential.
Manufacturing Companies for Switching Transformer - Fe-Based 1K101 Amorphous Ribbon – Malio Detail:

Description

Product Name Fe-Based 1K101 Amorphous Ribbon
P/N MLAR-2131
Width 5-80mm
Thickness 25-35μm
Saturation magnetic induction 1.56  Bs (T)
Coercivity  2.4  Hc (A/m)
Resistivity 1.30 (μΩ·m )
Magnetostriction coefficient 27 λs (ppm)
Curie temperature 410  Tc (℃)
Crystallization temperature 535  Tx (℃)
Density 7.18 ρ (g/cm3)
Hardness 960  Hv (kg/mm2)
Thermal expansion coefficient 7.6  (ppm/℃)

Application

● Mid-frequency power transformer core, distribution transformer core

● Toroidal uncut cores for smooth filtered output inductors and differential mode input inductors for switching power supplies

● Noise suppression in car stereos, toroidal uncut cores for car navigation system chokes

● Ring-cut cores for PFC power factor correction in air conditioning and plasma TVs

● High frequency rectangular cut cores for output inductors and transformers for switching power supplies, uninterruptible power supplies, etc.

● Toroidal, uncut cores for IGBTs, MOSFETs and GTOs pulse transformers

● High power density variable speed motors, stators and rotors for generators

Features

● Highest saturation magnetic induction among amorphous alloys-reduce components size

● Low coercivity- Improve components efficiency

● Variable Magnetic flux rate – By different core heat treatment processes to meet the requirements of different applications

● Good temperature stability- Can work at -55°C -130°C for long periods of time

● Cores used in transformers are 75% more energy efficient than S9 silicon steel cores in terms of no-load losses and 25% more energy °C efficient in terms of load losses

● Short strip production process and low production cost (see Fig. 1.1)

● The strip has a special microstructure which determines its excellent magnetic properties (Fig. 1.2) and performance stability.

● The composition and process parameters of the strip can be quickly adjusted to meet different usage requirements.

● For new energy solar grid-connected inverters

1

Figure 1.1 Amorphous ribbon production process

2

Figure 1.2 Bs versus Hc of different soft magnetic materials

Material comparison

Performance Comparison of Fe-based amorphous alloys with cold-rolled silicon steel

Basic parameters

Fe-based amorphous alloys

Cold-rolled silicon steel(0.2mm)
Saturation magnetic induction Bs (T)

1.56

2.03

Coercivity Hc (A/m) 2.4   25
Core losses(P400HZ/1.0T)(W/kg) 2 7.5
Core losses(P1000HZ/1.0T)(W/kg) 5 25
Core losses(P5000HZ/0.6T)(W/kg) 20 >150
Core losses(P10000HZ/0.3T)(W/kg) 20 >100
Maximum magnetic permeability (μm 45X104 4X104
Resistivity (mW-cm) 130 47
Curie temperature(℃) 400 740

1
2
3
440
5
6
7
11


Product detail pictures:

Manufacturing Companies for Switching Transformer - Fe-Based 1K101 Amorphous Ribbon – Malio detail pictures

Manufacturing Companies for Switching Transformer - Fe-Based 1K101 Amorphous Ribbon – Malio detail pictures

Manufacturing Companies for Switching Transformer - Fe-Based 1K101 Amorphous Ribbon – Malio detail pictures

Manufacturing Companies for Switching Transformer - Fe-Based 1K101 Amorphous Ribbon – Malio detail pictures

Manufacturing Companies for Switching Transformer - Fe-Based 1K101 Amorphous Ribbon – Malio detail pictures


Related Product Guide:

Our crew through skilled training. Skilled skilled knowledge, strong sense of company, to meet the company wants of customers for Manufacturing Companies for Switching Transformer - Fe-Based 1K101 Amorphous Ribbon – Malio , The product will supply to all over the world, such as: Russia, Tunisia, Latvia, Faced with the vitality of the global wave of economic integration, we've been confident with our high-quality items and sincerely service to all our customers and wish we can cooperate with you to create a brilliant future.
  • This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
    5 Stars By Julie from Mali - 2017.09.30 16:36
    With a positive attitude of "regard the market, regard the custom, regard the science", the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.
    5 Stars By Danny from United States - 2017.09.26 12:12
    Write your message here and send it to us